To use the internet in your room and access the College's wireless networks, you will first need to register for the Student Halls Network service as follows: 

  • Connect your computer to the network socket in your room via ethernet cable 
  • Switch on your computer and open a web browser 
  • Browse to any external webpage and you will be automatically redirected to the registration page

You should pay special attention to any notices on computer security or conditions of use. If this is not working or you have an obviously broken or damaged socket, you will need to contact ICT on +44 (0)20 7594 9000 to request a repair. 

Get connected

Internet

The preferred method of connection is ‘wired’ through the network data port as this will provide a faster and more reliable connection.  

WiFi is generally available throughout all communal areas in Halls and we aim to provide good coverage, however building design often makes this difficult and signal strengths may vary.  

Currently, only devices that can connect using WPA2 Enterprise (username & password authentication) are able to connect using WiFi. Unfortunately, some smart devices (TV, Alexa, Xbox, PS4\PS5 etc.) do not support this and therefore will not be able to connect using WiFi. However, in most cases, if the devices has an ethernet port then it can be registered for use on the wired network.  

We also have ‘in-room’ WiFi units in Beit, Eastside, Southside and Kemp Porter Halls. See the next tab for  details on how to connect via these devices. 

 

In-room wifi units

We have ‘in-room’ WiFi units in Beit, Eastside, Southside and Kemp Porter Halls. On these units, ports 2 and 3 are available for student use with Port 1 reserved for phones. The LED light on the front of the unit has been disabled.   

In Beit, Eastside and Southside Halls there is a single ‘in-room’ unit installed in twin rooms. Both occupants will have access to WiFi. However, if you both wish for wired connection, one will have access to the ports on the unit itself, the other will need to use the network data ports on the wall. 

Note: The image shows the units deployed in Southside, Eastside and Beit Halls. Units in Kemp Porter Halls do not have a console port. 

Smart devices in halls

At this current time, we cannot support smart devices in student halls. This is due to both the majority of devices not supporting the wireless network we currently use in halls, and that these devices work on the principle of being within a home ‘bubble’ network. The College network is a much larger bubble meaning we could run the risk of anyone being able to control your device.  

There have been many proposals on how we could allow each person to have a personal bubble in their Halls room, and possibly across the College as whole. However, this is a long-term aim that will most likely not be available this Academic year. 

Because of this, we are unable to support the following devices on the network: 

  • Amazon Echo devices 
  • Amazon Fire sticks 
  • Google Home devices 
  • Google Nest devices 
  • Chromecast devices 
  • Philips Hue hub/bulbs 
  • All other WIFI controlled bulbs / sockets 

This is by no means an extensive list, as a general rule if it connects to wireless and needs to be configured via an app it is unlikely to work.